SHEETS, PLATES & COILS

PRODUCT RANGE

Pipes & Tubes

♦ Round Bars

♦ Flanges

♦ Fasteners

400 MONEL SHEETS, MONEL ALLOY 400 PLATES & ALLOY 400 COILS

Venus Pipe And Tubes is specialized in manufacturing quality Monel 400 Sheets , which is a solid-solution alloy that can be hardened only by cold working. Monel, any of a group of nickel – copper alloys, contains about 66 percent nickel and 31.5 percent copper, with small amounts of iron, manganese, carbon, and silicon.

Monel 400 Plates offered by Venus Pipe And Tubes are specifically nickel – base alloys that contain between 29 and 33 percent copper, where nickel and copper form a solid solution in all compositions. Stronger than pure nickel, Monel alloys are resistant to corrosion by many agents, including rapidly flowing seawater.

Monel 400 Coils can be fabricated readily by hot and cold working, machining, and welding. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Thus, these Alloy 400 Sheets offered by Venus Pipe And Tubes can only be hardened by further rolling, while showing excellent corrosion resistance, which is higher than that of pure nickel in reduced environments and better than that of copper in oxidizing environments.

It is used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers. Alloy 400 Plates is also used as part of metal instruments and frames of eyeglasses. It has excellent mechanical properties at sub – zero temperatures. Venus Pipe And Tubes also offer these Alloy 400 Coils in different sizes, shapes and designs as per clients’ specifications at reasonable price.

UNS N04400 MONEL ALLOY SHIM SHEET, MONEL ALLOY 400 PLATES, 400 MONEL ALLOY COILS & 400 ALLOY FOILS MANUFACTURER IN INDIA

MONEL ALLOY 400 SHEETS, PLATES & COILS SPECIFICATION

StandardsASTM B127 / ASME SB127
Sheet & Plate in Form ofCoils, Foils, Flats, Strip, Blank (Circle), Ring (Flange) & Perforated Sheet Etc.
 

400 MONEL ALLOY SHEETS, ALLOY 400 PLATES, MONEL 400 COILS SPECIFICATION:

GradeMonel Alloy 400, UNS N04400, Werkstoff Nr. 2.4360
TypeSheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc.
Thickness0.3mm To 200mm
Width
200mm to 3000mm
Length500mm to 12000mm
FinishHot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc
FormCoils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
HardnessSoft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

EQUIVALENT GRADES OF MONEL ALLOY 400 PLATES, SHEETS & COILS:

STANDARDUNSWERKSTOFF NR.ENBSGOSTJISAFNOR
Monel 400N044002.4360NiCu30FeNA 13МНЖМц 28-2,5-1,5NW 4400NU-30M

MONEL ALLOY 400 PERFORATED SHEET, ALLOY 400 CHEQUERED PLATE, UNS N04400 SHEET, 400 MONEL COILS, 400 ALLOY FOILS & ALLOY 400 COILS SUPPLIER & EXPORTER IN INDIA.

MONEL ALLOY 400 PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

GradeCMnSiSCuFeNi
Monel 4000.30 max2.00 max0.50 max0.024 max28.00 – 34.002.50 max63.00 min

400 MONEL ALLOY PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
Monel 4008.8 g/cm31350 °C (2460 °F)Psi – 80,000 , MPa – 550Psi – 35,000 , MPa – 24040 %
 

AVAILABLE TYPES OF 400 MONEL ALLOY COILS, MONEL ALLOY 400 SHEETS & ALLOY 400 PLATES

  • Monel Alloy 400 Plates
  • Alloy 400 Rolls
  • 400 Alloy Ring
  • Alloy UNS N04400 Blank
  • 400 Monel Alloy Coils
  • UNS N04400 Coils
  • 400 Monel Hot Rolled Plates
  • 400 Monel Alloy Sheets
  • Alloy 400 Chequered Plate
  • Monel Alloy 400 Circles
  • Alloy 400 Flat
  • Monel Alloy 400 Profile
  • UNS N04400 Plates
  • 400 Alloy Cold Rolled Plates
  • Alloy 400 Shim Sheet
  • Monel 400 Perforated Sheet
  • Alloy 400 Coils
  • Monel 400 Strips
  • Alloy 400 Foils
  • Monel 400 Polished Sheets
  • UNS N04400 Sheets