SHEETS, PLATES & COILS

90/10 COPPER SHEETS, 90/10 COPPER PLATES & 90/10 COPPER COILS

Venus Pipe And Tubes is one of the prominent leader of Cu-Ni 90 / 10 Sheets and Plates , which have high resistance to crevice corrosion, stress corrosion cracking and hydrogen embrittlement that can be troublesome to other alloy systems. In seawater, the alloys have excellent corrosion rates which remain low as long as the maximum design flow velocity is not exceeded, where this velocity depends on geometry and pipe diameter.

Cu-Ni 90 / 10 Plates offered by Venus Pipe And Tubes naturally form a thin protective surface layer over the first several weeks of exposure to seawater and this provides its on-going resistance. Additionally, they have a high inherent bio-fouling resistance to attachment by macrofoulers (e.g. sea-grasses and molluscs) living in the seawater.

To use this property to its full potential, Cupronickel 90 / 10 Sheets from Venus Pipe And Tubes needs to be free of the effects of, or insulated from, any form of cathode protection. It is important, therefore, to avoid exposure to such conditions, particularly during commissioning and refit while the surface films are maturing.

Cupronickel 90 / 10 Plates offered by Venus Pipe And Tubes can show high corrosion rates in polluted or stagnant seawater when sulphides or ammonia are present. Ferrous sulphate dosing to sea water systems can provide improved resistance. Venus Pipe And Tubes also offer these Copper Nickel 90 / 10 Sheets Plates in different sizes, shapes and designs as per clients’ specifications at reasonable price.

90/10 COPPER NICKEL SHIM SHEET, UNS C70600 CUPRO NICKEL PLATES, CU-NI 90/10 COILS & FOILS MANUFACTURER IN INDIA

COPPER 90/10 SHEETS, PLATES & COILS SPECIFICATION

GradesCopper alloy plate C101, Copper alloy plate C102, Copper alloy plate C103, Copper alloy plate B170, Copper alloy plate B379 – UNS C70600 (Cu-Ni 90/10)
MaterialCopper Chromium, Copper Beryllium, Tungsten Copper
SpecificationASTM / ASME SB 62
Thickness0.3mm To 200mm
Width
200mm to 3000mm
Length500mm to 12000mm
FinishHot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc
FormCoils, Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate
FeaturesHigh tensile strength, Less maintenance, Precise engineering
HardnessSoft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

UNS C70600 COPPER PERFORATED SHEET, 90/10 COPPER ALLOY CHEQUERED PLATE, CU-NI 90/10 SHEET, 90/10 CUPRO NICKEL COILS, CU-NI 90/10 FOIL SUPPLIER & C70600 COPPER PLATES EXPORTER IN INDIA.

COPPER 90/10 PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

GradeCuMnPbNiFeZn
Cupro Nickel 90/1088.6 min1.0 max0.05 max9-11 max1.8 max1 max

90/10 COPPER PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

GradeCuMnPbNiFeZn
Cupro Nickel 90/1088.6 min1.0 max0.05 max9-11 max1.8 max1 max

EQUIVALENT GRADES OF COPPER 90/10 PLATES, SHEETS & COILS:

STANDARDWERKSTOFF NR.UNS
Cupro Nickel 90/102.0872C70600
 
 

AVAILABLE TYPES OF 90/10 COPPER ALLOY SHEETS, 90/10 COPPER ALLOY PLATES & 90/10 COPPER ALLOY COILS

  • Copper 90/10 Plates
  • Cupro Nickel 90/10 Rolls
  • Cu-Ni 90/10 Ring
  • Copper UNS C70600 Blank
  • 90/10 Copper Coils
  • UNS C70600 Coils
  • 90/10 Copper Hot Rolled Plates
  • Cupro Nickel 90/10 Sheets
  • Cu-Ni 90/10 Chequered Plate
  • 90/10 Copper Circles
  • Cupro Nickel 90/10 Flat
  • 90/10 Copper Profile
  • UNS C70600 Plates
  • Copper 90/10 Cold Rolled Plates
  • 90/10 Copper Shim Sheet
  • Cupro Nickel 90/10 Perforated Sheet
  • 90/10 Copper Coils
  • 90/10 Cupro Nickel Strips
  • Copper Alloy 90/10 Foils
  • Cu-Ni 90/10 Polished Plates