SHEETS, PLATES & COILS

STAINLESS STEEL 321 SHEETS, 321 STEEL PLATES & STEEL 321 COILS

Venus Pipe And Tubes is one of the prominent stockiest & supplier of Stainless Steel 321 Sheets , which is tougher than grade 304 stainless steel with a long stringy chip; however, using chip breakers is recommended. This machining stainless steel grade requires low speeds and constant feeds to reduce its tendency to work harden.

Welding in Stainless Steel 321 Plates can be performed using most of the conventional fusion and resistance methods. Oxyacetylene welding should be avoided, where filler metal is recommended and conventional hot working processes can be performed. SS 321 Sheets should be heated to 1149 Degree – 1260 Degree C (2100 Degree F – 2300 Degree F); however, it should not be heated below 927 Degree C (1700 Degree F). To optimize corrosion resistance, a post-work annealing is recommended.

Shearing, stamping, heading and drawing are possible with SS 321 Plates and post – work annealing is recommended to eliminate internal stresses. Annealing is performed at 1010 Degree C – 1121 Degree C (1850 Degree F – 2050 Degree F), which should be followed by rapid cooling. 321 Stainless Steel Sheets does not respond to heat treatment, which is further stabilized against chromium carbide formation by the addition of titanium. It can be easily welded and processed by standard shop fabrication practices. Venus Pipe And Tubes also offer these 321 Stainless Steel Plates in different sizes, shapes and designs as per clients’ specifications at reasonable price.

321 STAINLESS STEEL SHIM SHEET, STEEL 321 PLATES, STAINLESS STEEL 321 COILS & FOILS, UNS S32100 STEEL HAIR LINE SHEETS MANUFACTURER IN INDIA

EQUIVALENT GRADES OF 321 STAINLESS STEEL PLATES, SHEETS & COILS:

STANDARDWERKSTOFF NR.UNS
SS 3211.4541S32100

321 STAINLESS STEEL PLATES, 321 STEEL SHEETS, & 321 STEEL COILS SPECIFICATION:

GradeStainless Steel 321 / UNS S32100
SpecificationASTM A240 / ASME SA240
TypesSheets, Plates, Coils, Strip, Flats, Profile, Blank, Circle, Ring etc
FormStainless Steel Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Etched Sheet, Embossed Sheet, Brush Sheet, No 4 Matt Pvc Sheet, Hair Line Sheet, etc
Thickness0.3mm To 200mm
Width
200mm to 3000mm
Length500mm to 12000mm
FinishHot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc

321 STAINLESS STEEL PERFORATED SHEET, STEEL CHEQUERED PLATE, STEEL 321 SHEET, STEEL 321 COILS, UNS S32100 STEEL FOILS & COILS, 321 STAINLESS STEEL NO 4 PVC SHEETS SUPPLIER & EXPORTER IN INDIA.

321 STAINLESS STEEL PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

GradeCMnSiPSCrNNiTi
SS 3210.08 max2.0 max1.0 max0.045 max0.030 max17.00 – 19.000.10 max9.00 – 12.005(C+N) – 0.70 max

STAINLESS STEEL 321 PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
8.0 g/cm31457 °C (2650 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %
 

AVAILABLE TYPES OF 321 SS COILS, 321 SS FOILS, 321 SS PLATES & 321 SS SHEETS

  • 321 Stainless Steel Plates
  • Steel 321 Rolls
  • UNS S32100 Ring
  • Steel 321 Blank
  • 321 SS Coils
  • UNS S32100 Coils
  • SS UNS S32100 Polished Plates
  • Steel 321 Sheets
  • 321 Steel Chequered Plate
  • SS 321 Circles
  • Steel 321 Flat
  • Stainless 321 Profile
  • UNS S32100 Steel Plates
  • 321 SS Cold Rolled Plates
  • SS 321 Shim Sheet
  • 321 Steel Perforated Sheet
  • Stainless 321 Coils
  • 321 Steel Strips
  • Stainless Steel 321 Foils
  • UNS S32100 Steel Sheets
  • SS 321 Hot Rolled Plates