SHEETS, PLATES & COILS

S32760 SUPER DUPLEX SHEETS, SUPER DUPLEX PLATES & SUPER DUPLEX COILS

Venus Pipe And Tubes is one of the pioneer producer and stockiest for quality Super Duplex S32760 Sheets , which is described as a super duplex stainless steel with a microstructure of 50 / 50 austenite and ferrite. Ambient and sub – zero (down to minus 50 Degree C) notch ductility is good. Providing higher strength than both austenitic and 22 % Cr in Super Duplex S32760 Plates is suited to a variety of applications in industries such as Chemical Processing, Oil & Gas, and Marine environments.

SUPER DUPLEX 2205 SHIM SHEET, S32760 SUPER DUPLEX PLATES, SUPER DUPLEX UNS S32760 COILS & FOILS MANUFACTURER IN INDIA

These attributes mean that this super duplex steel can be used successfully as an alternative to 300 series stainless steel (such as type 316), standard 22 % Cr and precipitation hardening stainless steels. Alloy 32760 Sheets exhibits a low coefficient of thermal expansion and higher heat conductivity than austenitic steels and is suitable for working temperatures up to 300 Degree C.

The high-temperature strength of this alloy is basically the same as Type 430 in the range of 950 Degree C – 1150 Degree C. Alloy 32760 Plates should be noted that the strength increases abruptly below 900 Degree C. Solution annealing should be done after hot working.

Regarding cold workability, care is required in UNS S32760 Super Duplex Sheets as proof stress is high and elongation is low in comparison with Type 304. Venus Pipe And Tubes also offer these UNS S32760 Super Duplex Plates in different sizes, shapes and designs as per clients’ specifications at reasonable price.

S32760 SUPER DUPLEX STEEL PLATES, 2205 SUPER DUPLEX SHEETS, 2205 SUPER DUPLEX COILS SPECIFICATION:

GradeSuper Duplex UNS NO S32760
Thickness0.3mm To 200mm
Width
200mm to 3000mm
Length500mm to 12000mm
StandardASTM A240 / ASME SA240
FinishHot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc
FormCoils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
ApplicationsChemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, and Finance & Personal.

SUPER DUPLEX S32760 PERFORATED SHEET, 2205 SUPER DUPLEX CHEQUERED PLATE, SUPER DUPLEX S32760 SHEETS, SUPER DUPLEX S32760 COILS, S32760 SUPER DUPLEX STEEL FOILS & 2205 COILS SUPPLIER & EXPORTER IN INDIA.

S32760 SUPER DUPLEX STEEL PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

GradeCMnSiPSCrMoNiNFe
S327600.05 max1.00 max1.00 max0.030 max0.010 max24.00 – 26.003.00 – 4.006.00 – 8.000.20 – 0.3057.61 min

SUPER DUPLEX S32760 PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

GradesDensity (g/cm 3)Density (lb/in 3)Melting Point (°C)Melting Point (°F)
S32750 / S327607.80.28113502460

EQUIVALENT GRADES OF SUPER DUPLEX S32760 PLATES, SHEETS & COILS:

STANDARDWERKSTOFF NR.UNS
Super Duplex 25071.4410S32750 / S32760
 

AVAILABLE TYPES OF 2205 SUPER DUPLEX STEEL COILS, S32760 SUPER DUPLEX PLATES & S32760 SUPER DUPLEX SHEETS

  • Super Duplex S32760 Plates
  • UNS S32760 Super Duplex Rolls
  • S32760 Super Duplex Steel Polished Plates
  • Super Duplex 2205 Ring
  • 2205 Super Duplex Blank
  • S32760 Super Duplex Coils
  • S32760 Super Duplex Plate
  • Super Duplex S32760 Sheets
  • Super Duplex 2205 Chequered Plate
  • S32760 Super Duplex Circles
  • Super Duplex S32760 Flat
  • Super Duplex S32760 Shim Sheet
  • 2205 Super Duplex Perforated Sheet
  • Super Duplex S32760 Coils
  • S32760 Super Duplex Strips
  • Super Duplex S32760 Foils
  • S32760 Super Duplex Sheets
  • S32760 Super Duplex Steel Cold Rolled Plates
  • S32760 Super Duplex Profile
  • Super Duplex S32760 Plates
  • 2507 Super Duplex Steel Hot Rolled Plates