PIPES & TUBES
- Nickel Alloy 200 Pipes & Tubes
- Nickel Alloy 201 Pipes & Tubes
- Monel Alloy 400 Pipes & Tubes
- Monel Alloy K500 Pipes & Tubes
- Inconel Alloy 600 Pipes & Tubes
- Inconel Alloy 601 Pipes & Tubes
- Inconel Alloy 625 Pipes & Tubes
- Inconel Alloy 718 Pipes & Tubes
- Inconel Alloy 800 Pipes & Tubes
- Inconel Alloy 825 Pipes & Tubes
- Alloy 20 Pipes & Tubes
- Hastelloy B2 Pipes & Tubes
- Hastelloy C22 Pipes & Tubes
- Hastelloy C276 Pipes & Tubes
- 304 Stainless Steel Pipe & Tube
- 304L Stainless Steel Pipe & Tube
- 304H Stainless Steel Pipe & Tube
- 310 Stainless Steel Pipe & Tube
- 310H Stainless Steel Pipe & Tube
- 316 Stainless Steel Pipe & Tube
- 316L Stainless Steel Pipe & Tube
- 316Ti Stainless Steel Pipe & Tube
- 316H Stainless Steel Pipe & Tube
- 317 Stainless Steel Pipe & Tube
- 317L Stainless Steel Pipe & Tube
- 321 Stainless Steel Pipe & Tube
- 347 Stainless Steel Pipe & Tube
- 904L Stainless Steel Pipe & Tube
INCONEL 600 PIPES & INCONEL ALLOY 600 TUBES
Venus Pipe And Tubes is one of the prominent supplier and trader of Inconel 600 Pipes & Tubes, which is annealed at 1038 Degree C (1900 Degree F) followed by cooling. Inconel 600 Tubes with excellent corrosion resistance in the first and the second recycling use of the high purity water in the nuclear reactor. When under the high temperature, annealing and state solutions of Alloy 600 Pipes have good antioxidant off and high-intensity in the air. Alloy 600 Tubes from Venus Pipe And Tubes resists the ammonia, nitriding and carburizing atmosphere, but at the turn of the changes in redox conditions, it will be corrosion by parts of oxidation media.
Corrosion rates for Inconel 600 Seamless Pipes in oxidizing and reducing sulfidizing atmospheres, which is further hardened by cold working. Petrochemical works production of catalytic regeneration in the application of more than 700 Degree C recommended the use of Inconel 600 Welded Pipes, in order to obtain a longer service life.
Inconel 600 EFW Pipes from Venus Pipe And Tubes is especially excellent corrosion resistance to dry chlorine and chlorine hydride applied up to 650 Degree C. Inconel 600 ERW Pipes from Venus Pipe And Tubes has high strength over a broad range of temperatures. Mechanical properties of Alloy 600 Seamless Tubes vary with product form and temper. Restricted carbon plus columbium stabilization in Alloy 600 Welded Tubes permits welded fabrications to be used in corrosive environments, normally without post-weld heat treatment.
INCONEL 600 SEAMLESS & WELDED PIPES, ALLOY 600 ERW PIPE & INCONEL ALLOY 600 TUBES SUPPLIERS, UNS N06600 SEAMLESS TUBES, WNR 2.4816 ALLOY TUBING MANUFACTURER IN INDIA.
INCONEL 600 PIPES & TUBES SPECIFICATION
Grade | Inconel 600 / (UNS N06600) / WNR 2.4816 |
---|---|
Standard | ASTM B163, B167, B725, B775, B829, B516, B517 / ASME SB163, SB167, SB725, SB775, SB829, SB516, SB517 |
Dimensions | ASTM, ASME and API |
Seamless 600 Pipes | 4 to 219mm W. T.: 0.5 to 20mm |
Welded 600 Pipes | 5.0 mm – 1219.2 mm |
EFW 600 Pipes | 5.0 mm – 1219.2 mm |
Alloy 600 Tubes Size | 6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk. |
Schedule | SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
Sizes | 15″NB TO 150″NB IN |
Length | Within 13500mm |
Form | Round, Square, Rectangular, Hydraulic Etc. |
Type | Seamless / ERW / EFW / Welded / Fabricated / LSAW Pipes |
End | Plain End, Beveled End, Treaded |
Products | OD | WT | Length | |||
Inch | MM | Inch | MM | Ft max. | Mt max. | |
Inconel 600 Tube | 1/2’’-3’’ | 12.0-76.2 | 0.02’’-0.5’’ | 0.5-12.0 | 105’ | 32.00 |
Inconel 600 Pipe | NPS1/2’’-6’’ | 21.34-168.3 | Sch10-Sch80 | 2.11-12.7 | 98’ | 30.00 |
ALLOY 600 PIPES, INCONEL 600 SEAMLESS PIPES, INCONEL 600 WELDED TUBES, INCONEL 600 FABRICATED PIPES, ALLOY 600 FABRICATED TUBES SUPPLIER & EXPORTER IN INDIA.
INCONEL 600 PIPES & TUBES CHEMICAL COMPOSITION
Inconel 600 | Ni + Co | Cr | Fe | C | Mn | S | Si | Cu |
72.0 min | 14.0-17.0 | 6.0-10.0 | .15 max | 1.00 max | .015 max | .50 max | .50 max |
INCONEL ALLOY 600 PIPES & TUBES PHYSICAL, MECHANICAL PROPERTIES
Inconel 600 | |
Density | 8.4 g/cm³ |
Melting Range,℃ | 1370-1425 ℃ |
Elongation % | 30min. |
Tensile strength – Mpa | 550min. |
Yield strength – Mpa | 240min. |
Brinell hardness (HB) | ≤195 |
EQUIVALENT GRADES OF INCONEL 600 PIPES & TUBES
STANDARD | UNS | WERKSTOFF NR. | AFNOR | OR | GOST | BS | EN | JIS |
Inconel 600 | N06600 | 2.4816 | NC15FE11M | ЭИ868 | МНЖМц 28-2,5-1,5 | NA 13 | NiCr15Fe | NCF 600 |
AVAILABLE TYPES OF INCONEL 600 PIPES & INCONEL 600 TUBES
- Inconel 600 Pipes
- Alloy 600 Tubes
- Inconel 600 Tubes
- Alloy 600 Pipes
- Inconel UNS N06600 Tubes
- 600 Alloy Seamless Pipe
- N06600 Welded Pipes
- 600 Inconel Alloy Custom Pipe
- UNS N06600 Polished Pipe
- Inconel 600 Decorative Pipe
- Alloy 600 Fabricated Pipes
- 600 Alloy Seamless Tubes
- UNS N06600 Pipes
- WNR 2.4816 Welded Tubing
- Alloy 600 Tubing
- Inconel 600 Seamless Tubing
- 600 Alloy Fabricated Tubes
- UNS N06600 Thick Wall Pipe
- Inconel 600 Thin Wall Pipe
- Alloy 600 Decorative Tube
- WNR 2.4816 Round Pipes
- Alloy 600 Square Tube
- UNS N06600 Capillary Tubes
- 600 Alloy EFW Tubes
- Inconel 600 Hydraulic Tubes
- Alloy 600 Rectangular Pipe
- Inconel 600 Instrumentation Tube
- ASME SB516 Inconel Polish Tubes
- Inconel 600 Heat Exchager Tube
- 600 Inconel Round Tube